User Manual
6 www.AvantcoEquipment.com
Operation
Controls
0. Emergency off switch
1. Pulse button – Wait until Machine stops, open the lid, and press the button to discharged the peeled product
2. Power Indicator – Will light when unit is plugged in
3. On Indicator – Will light when unit is running
4. Timer - Turn the timer knob to the desired operating time (0-5 minutes). The machine starts operating and the
on indicator (green) lights up. Once the set time is reached, the machine stops and the operating indicator goes out.
Instructions
•
Open the transparent lid by pulling the handle (A) until it clicks open.
•
Put the disk in and load the tank with the product to be processed.
•
Lock the lid and make sure the outlet door (B) is locked.
•
Turn the master wall switch on. Power white indicator (C) will light.
•
Start the machine by turning the timer knob (F) on the required working-cycle time length, the on indicator
(D) will light.
•
Make sure rinsing water is flowing in.
•
The machine will automatically stop and the on green indicator will go off on ending the set cycle.
•
To let the processed product out, open the outlet door (B) after putting a container underneath it. Then press pulse
push- button (E) to allow the on-empty rotation of the disk. Meanwhile hold the outlet door to check the product
coming out without touching it.
CAUTION: never put your hand inside the outlet door to help the products come out. If there is any accident, please
press the emergency stop immediately.