Installation
WARNING:
All new mixer bowls and accessories including whips, beaters, and dough hooks should be properly washed before use.
Wash with hot water and a mild soap solution and then rinse off with either a mild vinegar or soda solution and then rinse
again with clean water. It is highly recommended this cleaning procedure is followed for bowls and accessories prior to
whipping egg whites or whole eggs. The mixer should be cleaned daily with a clean damp cloth.
If the unit has not been used for some time, it is recommended that the procedure above is followed before mixer use. It
is important that the rear bowl lift guides are greased every three months to prevent corrosion.
NOTE
！
The bowl safety guard is easily removable for cleaning. Please see specific instructions on page 5.
1. Prior to installation the electrical supply to the unit must be checked to ensure it complies to the electrical
rating of the machine as detailed on the serial plate.
2. The unit must be positioned to ensure there is sufficient space around the machine to operate the controls
and to raise and lower the mixing bowl. It is essential the unit is placed on a sturdy level surface.
4
www.AvantcoEquipment.com
User Manual
!
!
WARNING: DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CLEANING
Cleaning
THIS MIXER DOES NOT COME WITH A PLUG AND MUST BE HARD WIRED.
CONSULT A
PROFESSIONAL ELECRICIAN FOR INSTALLATION.