User Manual
8
Troubleshooting
TROUBLE
POSSIBLE CAUSE
SOLUTION
Attachment cannot be
installed onto the mixer hub Hub shaft is in let-in position
Rotate mixer's shaft slowly until
it can be inserted
Knife or plate scraping
front housing
Thrust bearing loose
Tighten thrust bearing
Lock pin not fully engaged
Make sure the lock pin is
properly engaged
Mounted unit rattles when
under power
Thumbscrew or securing
mechanism is loose or missing
Tighten or replace thumbscrew
Feed plate scraping plates
Feed plate is out of adjustment
Adjust feed plate with
adjusting screw
CAUTION: Review all safety notes and disconnect the electrical power supply
to the equipment before attempting corrective measures .
Summary of Contents for 177MX20SHRDR
Page 2: ...User Manual 2...
