2 www.AvantcoEquipment.com
User Manual
SAFETY INFORMATION:
WARNING:
Failure to comply with all requirements in this manual may lead to safety hazards and void warranty.
.
Installation
1. Place the water dispenser on a solid table and put the water tray at the bottom in front of the water dispenser.
Keep the boiling water dispenser away from children to avoid scalding.
2. One end of the inlet pipe is screwed on the water inlet on the back of the water dispenser.
3. The other end of the inlet pipe is screwed on the water supply, or on the faucet with the threaded mouth.
4. Turn on the water switch.
5. Insert the power plug into the 110-120V socket.
CHECK BEFORE STARTING:
1. The power cord should be connected to a 110/120V outlet.
2. The water line should be connected and not leaking.
3. The dispenser should be installed on a level, stable surface.
A. Tray
B. Drain Outlet
C. Water Inlet
D. Inlet Pipe
E. Water Faucet
F. 110-120V
A
B
C
D
E
F