www.AvantcoRefrigeration.com 5
User Manual
5
OPERATION
PREPARING THE PRODUCT
COLD DRINKS
BEVERAGE TEMPERATURE REGULATOR
Concentrate
In order to obtain a homogeneous mix, the product will need
to be pre-mixed before being added to the machine. Follow the
manufacturer’s recommendations for mixing.
Ready-to-Use & Pre-Mixed Concentrates
1. Turn the machine OFF and unplug from power supply.
2. Pour liquid into the bowl. (Fig. 3)
3. DO NOT pour below the MIN Level. (3-4 L)
4. DO NOT pour above the MAX Level.
1. Make sure that the main switch (A) is in the [OFF] position, and
plug in the machine. (Fig. 4)
2. Before starting the machine ensure that the bowls are properly
closed with their covers.
3. Turn the main switch (A) to [ON] position; the refrigerant group unit
will automatically start. (Fig. 4)
4. To start the mixing action, turn the mixing system switch (B) to [ON]
position. There is a switch for each container. (Fig. 4)
5. To pour drink out, press the drinking glass lightly against lever.
1. Every dispenser has been tested and the thermostat has been set
at c.a. +5°C temperature.
2. To adjust this temperature, turn the thermostat knob clockwise to
set a lower temperature. (Fig. 6)
3. In the case of a machine with an internal thermostat, remove left or
rear side panel (machine with 2 compressors).
4. To disassemble the side panels, loosen the screws on the panels,
pushing up then unlatching.
5. To adjust the temperature turn thermostat handle clockwise to set a
lower temperature.
Prepare the product separately before proceeding.
Before using the machine, all food contact surfaces and components must be cleaned
and sanitized in accordance to the Washing & Sanitizing section of this manual.
DO NOT run the pump without liquid.
Remove power plug before
adjusting temperature.
CAUTION
CAUTION
CAUTION
Fig. 3
Fig. 4
Fig. 6
B
A
