Avantco Equipment MX40, User Manual

Page: 3 / 16

User Manual
www.AvantcoEquipment.com 3
Standard Accessories
13 12
STANDARD ACCESSORIES
FIGURE 10
NEMA 5015P
110V
110V
OPERATION INSTRUCTION
ITEM DESCRIPTION QTY
1 Spatula 1
2 Dough Hook 1
3 Wisk 1
4 Bowl 1
NOTES:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
OFF
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
FOR CHANGING THE SPEED : Please stop machine first
before changing speed in order to avoid damage to the gear box
FOR CHANGING THE SPEED : Please stop machine first
before changing speed in order to avoid damage to the gear bo
MIXING
: According to the different mixing material.
Choose the different mixing devicews and speed.
MIXING : According to the different mixing material.
Choose the different mixing devicews and speed .
A. Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
A. Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
B. Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
B. Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins .
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50% .
A
B
C
13 12
STANDARD ACCESSORIES
FIGURE 10
NEMA 5015P
110V
110V
OPERATION INSTR
ITEM DESCRIPTION QTY
1 Spatula 1
2 Dough Hook 1
3 Wisk 1
4 Bowl 1
NOTES:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
OFF
Please ensure power supply m
Please ensure power supply m
FOR CHANGING THE SPEED :
before changing speed in order to
FOR CHANGING THE SPEED :
before changing speed in order t
MIXING
: According to the diffe
Choose the different mixing de
MIXING : According to the diffe
Choose the different mixing de
A. Be suitable for mix and stir
in speed speed, working time
A. Be suitable for mix and stir
in speed speed, working time
B. Be suitable for mix and stir
work in middle speed, working
B. Be suitable for mix and stir
work in middle speed, working
C. Middle position is suitable fo
is less than 30 minutes. Flour/ w
C. Middle position is suitable fo
is less than 30 minutes. Flour/ w
A
B
C
Item Description Qty
1 Flat Beater 1
2 Dough Hook 1
3 Wire Whip 1
4 Bowl 1
NOTES:
• Any agitator is easily installed by simply raising it onto the mixing axle, and the rotating it clockwise on the shaft
until it locks into place. To remove, raise the agitator on the shaft until it clears the lock and then rotate counter-
clockwise and lower.
• All of the accessories are precisely fitted to the bowl, have rounded corners, and are easily removed for cleaning.
Unpacking the Equipment
and Initial Setup
Carefully remove crating or packaging materials from the equipment. Models shipped on pallets are bolted to the
pallet. Bolts must be removed to safely separate the equipment from the pallet. Place the equipment on a flat surface
with sufficient space around the mixer to allow for safe cleaning and service. Plug only into grounded electrical outlets
matching the nameplate rated voltage. Do not use an extension cord with this equipment. Do not plug this equipment
into a power strip or multi-outlet power cord.
INSTALLATION:
1. Read this manual in its entirety prior to installation and operation. DO NOT install if you do not understand everything
in this manual.
2. Select a location for the mixer keeping in mind that:
• Surface must be level
• Location should be accessible for maintenance and service
• Location should offer adequate clearance for installing and removing agitators, bowls or attachments
• Location offers sufficient space for adding ingredients to the mixer
• Make sure that the rear ventilation outlet of the mixer is not blocked
12
STANDARD ACCESSORIES
FIGURE 10
ITEM DESCRIPTION QTY
1 Spatula 1
2 Dough Hook 1
3 Wisk 1
4 Bowl 1
NOTES:
• Any agitator is easily installed by sim
ply raising it onto the mixing axle, an
the rotating it clockwise on the sha
until into place. To remove, raise th
agitator on the shaft until it clears th
lock and then rotate counter-clockwi
and lower.
• All of tools are precisely fitted to th
bowl, rounded corners and eas
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim
ply raising it onto the mixing axle, an
the rotating it clockwise on the sha
until into place. To remove, raise th
agitator on the shaft until it clears th
lock and then rotate counter-clockwi
and lower.
• All of tools are precisely fitted to th
bowl, rounded corners and eas
removable for cleaning.
12
STANDARD ACCESSORIES
FIGURE 10
ITEM DESCRIPTION QTY
1 Spatula 1
2 Dough Hook 1
3 Wisk 1
4 Bowl 1
NOTES:
• Any agitator is easily installed by sim
ply raising it onto the mixing axle, an
the rotating it clockwise on the sha
until into place. To remove, raise th
agitator on the shaft until it clears th
lock and then rotate counter-clockwis
and lower.
• All of tools are precisely fitted to th
bowl, rounded corners and eas
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim
ply raising it onto the mixing axle, an
the rotating it clockwise on the sha
until into place. To remove, raise th
agitator on the shaft until it clears th
lock and then rotate counter-clockwis
and lower.
• All of tools are precisely fitted to th
bowl, rounded corners and eas
removable for cleaning.
12
FIGURE 10
ITEM DESCRIPTION QTY
1 Spatula 1
2 Dough Hook 1
3 Wisk 1
4 Bowl 1
NOTES:
• Any agitator is easily installed by sim
ply raising it onto the mixing axle, a
the rotating it clockwise on the sh
until into place. To remove, raise t
agitator on the shaft until it clears t
lock and then rotate counter-clockwi
and lower.
• All of tools are precisely fitted to th
bowl, rounded corners and eas
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim
ply raising it onto the mixing axle, a
the rotating it clockwise on the sh
until into place. To remove, raise t
agitator on the shaft until it clears t
lock and then rotate counter-clockwi
and lower.
• All of tools are precisely fitted to t
bowl, rounded corners and eas
removable for cleaning.