AVANT A36518, Operator'S Manual For Attachment, Page: 8 / 18

8 (18)

Make sure that the loader is equipped with necessary safety components, and that
they are in working condition. Seat belt must be used. If there are specific hazards
related to the operating area, use appropriate safety equipment.

Also read the safety instructions and correct use of the loader from the operator's
manual of the loader.
.
3.1 Personal protective equipment
Remember to wear proper personal protective equipment:

The noise level at the driver's seat may exceed 85 dB(A) depending on loader
model and operating cycle. Extended exposure to loud noise can cause
hearing impairment. Wear hearing protection while working with the loader.

Wear protective gloves.

Wear safety boots whenever working with the loader.

Wear safety glasses e.g. when handling hydraulic components.
. ..
3.2 Safe shutdown procedure
Safe position of the attachment, before leaving the loader or the attachment unattended
WARNING
Always set the attachment to a safe position before going near the attachment.
Safe position will prevent unintentional movements of the attachment. Safe stopping
procedure:

Lower the boom completely down (and lower any attachment possibly fitted on the
loader boom on the ground).

Shut down the loader engine and lock the parking brake.

Prevent moving of an uncoupled attachment. Use blocks if necessary.

Release the residual pressure from the hydraulic system; move all hydraulic control
levers to their extreme positions a couple of times.

Prevent starting of the machine, remove ignition key.