AVANT A36221, Operator'S Manual For Attachment

Page: 17 / 18

17 (18)
.
7. Inspections, maintenance, and service
Clean the attachment regularly to prevent accumulation of dirt which is more difficult to remove. You may use
a pressure washer and a mild detergent. Do not use strong solvents, and do not spray directly at the labels on
the attachment.
Do not store the attachment directly against the ground for long periods; place it on blocks of wood or on a
pallet, for example. For longer storage periods touch up the paint where needed and grease the lubrication
points.
Also the metal structures of the attachment must be inspected regularly. Check visually for damages and
inspect the quick attach brackets and their surrounding area carefully. The attachment must not be used if it is
deformed, cracked, or torn.
Welding repairs are only allowed to be carried out by professional welders. When welding, only methods and
additives suited for steel used in bucket must be used. For more information about repairs contact your
nearest service point.
. ..
8. Warranty terms
Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it
manufactures.
The warranty covers repair costs as follows:

Work costs are covered, if the repair is not performed at the factory.

The factory replaces any defective components or consumables.
The factory may reimburse the price of components purchased by the customer in special cases that have
been agreed in advance.
The warranty does not cover:

Normal maintenance work or parts and consumables required for it.

Damages caused by unusual operating conditions or ways of use, negligence, structural changes made
without the consent of Avant Tecno Oy, use of non-original parts or lack of maintenance.

Consequences of a defect, such as interruption of work or other possible additional damages.

Travel and/or freight costs caused by the repair.