AVANT A36123 Operator'S Manual For Attachment Download Page 21

Page: 21 / 22

Dozer Blade 2000 2016 1

EY-vaatimustenmukaisuusvakuutus

EG-försäkran om överensstämmelse

EU samsvarserklæring

EF-overensstemmelseserklæring

EC Declaration of Conformity

EG-Konformitätserklärung

Déclaration de conformité CE

Valmistaja / Tillverkare / Produsent / Producent / Manufacturer / Hersteller
Fabricant:

AVANT TECNO OY

Osoite / Adress / Adresse / Address / Adresse:

Ylötie 1

33470 YLÖJÄRVI, FINLAND

Vakuutamme täten, että alla mainitut tuotteet täyttävät konedirektiivin turvallisuus- ja terveysvaatimukset (direktiivi

2006/42/EY muutoksineen). Seuraavia yhdenmukaistettuja standardeja on sovellettu /

Vi försäkrar härmed att nedan beskrivna produkter överensstämmer med hälso- och säkerhetskrav i EG-maskindirektiv

(EG-direktiv 2006/42/EG som ändrat). Följande harmoniserade standarder har tillämpats /

Vi erklærer herved at produktet som er oppgitt under er i samsvar med forskriftene i Maskindirektivet (direktiv 2006/42/EC

med endringer). Følgende harmoniserte standarder har blitt anvendt /

Vi erklærer herved, at nedenstående produkter er i overensstemmelse med bestemmelserne i maskindirektivet (direktiv

2006/42/EF indeholdende ændringer). Følgende harmoniserede standarder er anvendt /

We hereby declare that the products listed below are in conformity with the provisions of the Machinery Directive (directive

2006/42/EC as amended). The following harmonized standards have been applied /

Wir erklären hiermit, dass die nachstehend aufgeführte Maschine konform ist mit den Bestimmungen der

EG-Maschinenrichtlinie (EG-Richtlinie 2006/42/EG mit Änderungen). Die folgende harmonisierte Normen wurden

angewandt:

Nous déclarons par la présente que les produits mentionnés ci-dessous sont conformes aux exigences en matière de

sécurité et de santé de la directive relative aux machines (directive 2006/42/CE, avec ses modifications) Les normes

harmonisées suivantes ont été appliquées

SFS-EN ISO 12100, SFS-EN ISO 4413

Mallit / Modeller / Modeller / Modeller / Models / Modellen:

Avant

Hydraulitoiminen puskulevy; Avant-kuormaajan työlaite

Hydraulisk schaktblad; arbetsredskap för Avant lastare

Hydraulisk snøskjær; redskap for Avant minilastere

Hydraulisk dozerblad; redskab til Avant Minilæssere

Hydraulic dozer blade; attachment for Avant loaders

Hydraulische Planierschild; Anbaugerät für Avant Radlader

Lame de nivellement à commande hydraulique destinée à être utilisée avec les
chargeuses Avant

A36123

A36251

22.1.2016 Ylöjärvi, Finland

Risto Käkelä,
Toimitusjohtaja / Verkställande direktör / Administrerende direktør /
Managing Director / Geschäftsführer / Directeur général

Summary of Contents for A36123























Search results

Summary of Contents for A36123

Reviews:

Related manuals for A36123

Brands by name

Popular brands

AVANT A36123, Operator'S Manual For Attachment

Search results

Summary of Contents for A36123

Reviews:

Related manuals for A36123

Brands by name

Popular brands