13(16)
7.3.
Lubricating the equipment
There are a total 15 lubricating points on the backhoe; they are marked in the figures below. Lubricant
should be added every 5-10 hours of use. In the pivot pins and the cylinders the grease nipples are standard
R1/8” nipples, replace any damaged nipple.
Lubricant must be added approximately every 5 to 10 operating hours. Clean the end
of the nipple before greasing. Only add the grease amount of a couple of grease
press pushes at a time.
8.
Warranty terms
Avant Tecno Oy grants a warranty of one year (12 months) for the attachment from the date of purchase.
The warranty covers repair costs as follows:
•
Work costs are covered, if the repair is not performed at the factory.
•
The factory replaces any defective components or consumables.
The factory may reimburse the price of components purchased by the customer in special cases that have been agreed in
advance.
The warranty does not cover:
•
Normal maintenance work, such as the replacement of blades or the belts, or parts and consumables required for it.
•
Damages caused by unusual operating conditions or ways of use, negligence, structural changes made without the
consent of Avant Tecno Oy, use of non-original parts or lack of maintenance.
•
Consequences of a defect, such as interruption of work or other possible additional damages.
•
Travel and/or freight costs caused by the repair.
