19 (26)
If the loader is not equipped with the boom self levelling:
WARNING
Prevent material from falling on you - Monitor the position of the silage block
cutter.
When lifting material to a high level, the front plate must be simultaneously tilted
to prevent the load from falling from on the loader or the operator. Fitting the loader with
the boom self levelling option makes repeated loading work easier.
WARNING
Avoid sudden loss of stability- Never drag loads from e.g. a shelf.
If the load that you
want to lift from a is too heavy when you load from height, the loader could tip forward
when reversing with the loader. Never reverse and drag with the loader before making
sure that the loader can handle the load that is being lifted.
6.3
Working on uneven ground
Extra caution is needed when using the equipment on inclined terrains and slopes. Drive slowly especially on
inclined, uneven, or slippery surfaces, and avoid sudden changes in speed or direction. Operate the controls
of the loader with careful and smooth movements. Watch out for ditches, holes on the ground, and other
obstacles, as hitting an obstacle may cause the loader to tip over.
Maximum lifting capacity can not be achieved on inclined terrain. On horizontally tilted terrain the load must
not be lifted high. The loader frame articulation should be kept straight when lifting heavy loads; turning the
load during lifting operation will affect the stability of the loader and may lead to overturning of the machine.
6.4
Transport position
CAUTION
Keep the loader stable. Always
transport the silage block cutter as
low and close to the ground as
possible. Keep the telescopic boom
retracted during drive.
