AVANT A21029, Instruction Manual

Page: 5 / 41

5(10)
4. Technical specifications
On the original instruction manual are listed the labels and markings, which must be visible on the equipment.
Replace the warning labels, if they have become unclear or detached completely. New labels are available via
your retailer.
Table 1 –Log cutter/splitter specifications
Product number A21262 A21029
Log length, min-max: 200 - 500 mm
Log diameter, min-max: 20 - 300 mm
Weight: 265 kg
Minimum operating
temperature:
-25’C
Saw flange: 13”
Splitting force: 30 kN
Dimensions, transport
configuration: L x W x H:
2780 x 1030 x 2450 mm
Maximum input of hydraulic
energy: 40 l/min,
22,5 MPa (225 bar)
Suitable AVANT loader: 216, 218, 220 320-750
5. Assembly of the log cutter/splitter
The log cutter/splitter is ready for use as delivered. Attach the attachment and its hydraulic hoses according to
the following instrucions.
5.1. Attaching the log cutter/splitter to the loader
Mounting the attachment to the loader is quick and easy, but it must be done carefully. If the attachment is not
locked to the loader, it may detach from the loader and cause hazardous situations. In the worst case, the
attachment may fall on the operator or slide onto the driver along a raised boom. For this reason, the
attachment must under no circumstances be raised to a height of over one metre when it has not been locked.
To prevent hazardous situations, always follow the attachment mounting instructions shown in the following
pages. Also remember the safety instructions in Section 3 and the information in the original instruction
manual.
The attachment is mounted to the AVANT loader boom quick attach plate and the counterpart on the
attachment. The locking is semi-automatic, but due to the relatively high position of the quick attach plate on
the log splitter, and the risk of tipping over of the attachment, the locking pins must be locked manually.
Never move or raise an attachment that has not been locked.