AVANT 1200, Operator'S Manual

Page: 7 / 30

7 (30)
WARNING: Risk of crushing - Never allow anyone to get under a lifted attachment
or loader boom. Keep in mind that the loader boom can be lowered or tilted even if the
engine has been shut down (crushing hazard). The loader is not intended to be left to keep
a load elevated for longer periods. Always lower the attachment to a safe position before
leaving the driver's seat.
CAUTION: Risk of cutting - Sharp blades. Beware of the sharp blades and risk of
crushing especially during maintenance or when removing blockages. Always stop the
attachment by following the safe stopping procedure. Note that the loader boom moves
down and may be tilted even if the engine has been stopped. Never go under a raised
boom or any component of the attachment. Keep away from the moving linkage.
Remember to wear proper protective clothing:

The noise level at the driver's seat may exceed 85 dB(A). Wear hearing
protection while working with the loader.

Wear protective gloves.

Wear safety boots whenever working with the loader.

Wear safety glasses when handling hydraulic components.
. ..
Safe stopping of the attachment, before going near the attachment:
WARNING: Always stop the attachment following safe stopping procedure
before leaving the driver's seat. Safe stopping procedure prevents all
unintentional movements of the attachment. Note that the loader boom can move
down even if the engine of the loader is turned off. Safe stopping procedure:

Lower the boom and the attachment on the ground.

Shut down the loader engine and lock the parking brake.

Release residual pressure from the hydraulic system; move all hydraulic control
levers to their extreme positions a couple of times.

Prevent starting of the machine, remove ignition key.