Avance Logic ALS100, User Manual, Page: 42 / 48

ALS100/L/M User’s Guide 10070 1.0
32 Setup Utility Program
6. In the Device menu, select “CD-ROM” to configure the CD-ROM.
The IDE/Disable box will be displayed. Select “IDE” to enable the
CD-ROM or select “Disable” to disable the CD-ROM.
7. In the Device menu, select “ADLIB” to configure the OPL3. The
Enable/Disable box will be displayed. Select “Enable” to enable the
OPL3 or select “Disable” to disable the OPL3.
8. In the Device menu, select “GAMEPORT” to configure the game
port. The Enable/Disable box will be displayed. Select “Enable” to
enable the game port or select “Disable” to disable the game port.
9. Press the ESC key to return to the Main Menu.
10. In the Main Menu, select “Set Volume”. The Setting Volume screen
will be displayed. Make and set any changes or accept the existing
settings and return to the Main Menu.
11. In the Main Menu, select “Sound Test”. The 8-Bit Sound/16-Bit
Sound/FM box will be displayed. Select each mode and verify the
correct operation of the ALS100/L/M sound card. Follow the instruc-
tions given for each mode. If the sound card does not operate cor-
rectly in all modes, reconfigure it by rerunning this procedure. Press
the ESC key to end the Sound Test and return to the Main Menu.
12. When satisfied with the operation of the ALS100/L/M sound card,
select “Quit Test” and press the Enter key to exit the utility.