4.
OPERATION
1.
Check plug and cord for damage before plugging into socket.
2.
Make sure safety arm is engaged.
3.
Make sure pulp bin and juice container are in place.
4.
Switch unit to “ON”.
5.
Allow basket to reach full speed.
6.
Slowly insert fruit and/or vegetables by hand (never insert ice).
a.
Remember to peel citrus before juicing.
b.
Remove any pits or large seeds.
c.
Fruit with thick skins need to be peeled.
d.
Avoid inserting stems.
Note:
If juicer begins to vibrate, this may be due to pulp becoming unevenly
distributed. Turn off the unit, allow basket to come to a complete rest
and clean out pulp.
7.
When finished, allow unit to run for a few seconds to allow all juice to
work through the system.
CLEANING
Machine can be rinsed out between two different kinds of fruit by switching unit “ON” and pouring
water through the feed tube. Clean unit after every use.
CAUTION:
NEVER DISASSEMBLE WHILE UNIT IS ON
CAUTION:
ALWAYS ENSURE UNIT IS UNPLUGGED BEFORE DISASSEMBLY
1.
Remove basket, flange and bowl from base.
2.
Clean each piece with mild soap (such as Noble Chemical’s
147SUNBRIGHT) and warm water. Use sponge or brush to remove any
pulp. If pulp has dried, allow to soak. DO NOT tap the basket against a
counter. This may cause damage to the basket.
3.
Wipe motor housing and all external surfaces with soft damp cloth.
CAUTION:
DO NOT SUBMERGE MOTOR IN WATER
4.
Allow parts to dry and reassemble (see assembly instructions on pg. 2-3).
