4.
1.
Remove the stainless steel shaft from the motor head and rinse under running water.
2.
Scrub with soap and warm water. Try Noble Chemical Sunbright (147SUNBRIGHT)
with warm water for a thorough clean.
3.
To ensure the blade is clean, immerse approximately 3/4 of the length of the stainless
steel shaft in a container of the washing solution and run for two (2) minutes on high.
4.
Allow time for air drying before next use of the immersion blender.
CLEANING
Wash, rinse and dry the blending shaft/whisk prior to initial use. Blender blades/shaft/whisk
should be cleaned after EVERY use to prevent residue build up around the blade assembly.
