3.
1.
2.
Place the immersion blender into the pot which contains ingredients to be mixed.
to the motor and void the warranty.
3.
The immersion blender has 2 switches. The
safety switch is labeled ENABLE and is located
on the top of the handle. The
ON/OFF
located on the inside of the handle. To start the
immersion blender, press the
ENABLE
switch
and the
ON/OFF
ENABLE
switch will only need to be pressed
once to start the unit, it can then be released
while keeping the
ON/OFF
4.
The immersion blender has a
VARIABLE SPEED
control knob on the top of the handle. Speed
• Clockwise
INCREASES
motor speed.
• Counter-clockwise
DECREASES
motor speed.
5.
It is advisable to start a low speed when using the whisk.
6.
To prevent any spills, do not leave the immersion blender on as your remove it from the
7.
the pot. This will create a vortex-like wave to properly mix the ingredients.
8.
complete stop.
9.
Always unplug the unit when done blending.
10.
If blending a recipe with ice, do not use cubed ice or else the blades will be damaged.
11.
The blades are
SHARP
cut-resistant
gloves.
OPERATION
ENABLE
ON/
OFF
VARIABLE
SPEED
