Avalue Technology HPS-621U4A, Quick Reference Manual

Page: 63 / 78

Quick Reference Guide
HPS-621U4A Quick Reference Guide 63
Item Options Description
BMC Support
Enabled [Default]
Disabled
Enable/Disable interfaces to communicate with BMC.
Wait For BMC
Enabled
Disabled [Default]
Wait For BMC response for specified time out. BMC
starts at the same time when BIOS starts during AC
power ON. It takes around 30 seconds to initialize
Host to BMC interfaces.
FRB-2 Timer
Enabled [Default]
Disabled
Enable or Disable FRB-2 time (POST timer).
FRB-2 Timer timeout
3 minutes
4 minutes
5 minutes
6 minutes [Default]
Enter value Between 3 to 6 min for FRB-2 Timer
Expiration value.
FRB-2 Timer Policy
Do Nothing [Default]
Reset
Power Down
Power Cycle
Configure how the system should respond if the FRB-2
Timer expires. Not available if FRB-2 Timer is
disabled.
OS Watchdog Timer
Enabled
Disabled [Default]
If enabled, starts a BIOS timer which can only be shut
off by Management Software after the OS loads. Helps
determine that the OS successfully loaded or follows
the OS Boot Watchdog Timer policy.
Power Control Policy
Do Not PowerUp
Last Power State
Power Restore
Unspecified [Default]
Configure how the system should respond if AC Power
is lost, Reset not required as selected Power policy will
be set in BMC when policy is saved.
3.6.3.1 System Event Log