Avalue Technology HPM-246, User Manual

Page: 48 / 97

HPM-246
User’s Manual
48 HPM-246
User’s Manual
‘start’ signal can be sent to re-start the flow.
Hardware flow control uses two wires to send
start/stop signals.
VT-UTF8 Combo Key
Support
Disabled
Enabled [Default]
Enable VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
Recorder Mode
Disabled [Default]
Enabled
With this mode enabled only text will be sent.
This is to capture Terminal data.
Resolution 100x31
Disabled [Default]
Enabled
Enables or disables extended terminal resolution.
Putty KeyPad
VT100 [Default]
LINUX
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on Putty.
3.6.2.6.2 Console Redirection Settings
Item Option Description
Out-of-Band Mgmt Port
COM1 [Default]
COM2
COM3(Serial Over LAN (SOL))
Microsoft Windows Emergency
Management Services(EMS) allows for
remote management of a Windows
Server OS through a serial port.
Terminal Type
VT100
VT100+
VT-UTF8 [Default]
ANSI
VT-UTF8 is the preferred terminal type
for out-of-band management. The next
best choice is VT100+ and then VT100.
See above, in Console Redirection
Settings page, for more Help with
Terminal Type/Emulation.
Bits per second
9600
19200
Select serial port transmission speed.
The speed must be matched on the