Avalue Technology ESM-EHLC, User Manual, Page: 70 / 88

ESM-EHLC
User’s Manual
70 ESM-EHLC User
’s Manual
SATA Device Type
Hard Disk Drive
Solid State Drive [Default]
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
SATA Port 1 DevSlp
Enabled
Disabled [Default]
Enable/Disable SATA Port 0 DevSlp. For
DevSlp to work, both hard drive and SATA
port need to support DevSlp function,
otherwise an unexpected behaviour might
happen. Please check board design before
enabling it.
3.6.3.2.3 USB Configuration
Item Option Description
XHCI Compliance Mode
Disabled [Default]
Enabled
Option to enable Compliance Mode. Default is to
disable Compliance Mode. Change to enabled for
Compliance Mode testing.
USB3 Link Speed Selection
GEN1
GEN2 [Default]
This option is to select USB3 Link Speed GEN1 or
GEN2.
USB Port Disable Override
Disabled [Default]
Select Per-Pin
Selectively Enable/Disable the corresponding USB
port from reporting a Device Connection to the
controller.