Avalue Technology EPX-APLP, User Manual

Page: 12 / 69

EPX-APLP
User’s Manual
12 EPX-APLP U
ser’s Manual
Power On
1 x 2 x 5 pin, pitch 2.00mm connector for front panel
Audio
1 x 1 x 10 pin, pitch 1.25mm connector for front Audio & 1 x 1 x 4 pin pitch
1.25mm connector For 3W Speaker
Internal I/O
Connector
Storage:
1 x M.2 Type B 3042/2242/2260 (with 1 x PCI-e x 1, USB 3.0, SATA Signal)
1 x M.2 Type A 2230 support WiFi module, 1 x PCI-e x 1, USB 2.0 Signal)
- 1 x SATA III
- 1 x 1 x 2 pin, pitch 2.00mm connector for SATA power connectors
1 x 2 x 5 pin, pitch 2.00mm connector for RS-232(Ring/5V/12V By Resistance)
2 x 2 x 5 pin, pitch 2.00mm connector for 4 USB 2.0
1 x 2 x 6 pin, pitch 2.00mm connector for GPIO: 8bits
1 x 1 x 10 pin, pitch 1.00mm connector for BIOS SPI/EC
1 x 2 x 2 pin, pitch 2.0mm connector for LPC Power(5V & 12V & Ring)
1 x horizontal type battery connector (Battery cable 170mm length)
1 x 2 x 5 pin, pitch 2.0mm connector for front panel
1 x 2 x 20 pin, pitch 1.25mm connector for LVDS (must be using DF13-2S-1.25C
connector)
1 x 1 x 5 pin, pitch 2.00mm Wafer connector for LCD inverter backlight
connector (5V/12V)
PWM/DC (By Resistance)
1 x 1 x 10 pin, pitch 1.25mm connector for front Audio & 1 x 1 x 4 pin pitch
1.25mm connector For 3W Speaker
1 x 3 pin, pitch 2.00mm connector for CMOS clear
1 x 1 x 3 pin, pitch 2.00mm connector for AT/ATX mode
1 x DC Jack lockable connector type
Fanless Operating
Rear I/O
Connectors
USB
2 x USB3.0
LAN
2 x Intel® I211AT PCI-e Gigabit Ethernet
Display
1 x DP++, 1 x HDMI
Rear Side External
I/O Connector
2 x RJ-45
2 x USB 3.0
1 x HDMI
1 x DP++
1 x DC Jack lockable connector type
Mechanical &
Environmental
Power Requirement
DC in +12V
ACPI Single power ATX Support S0, S3, S4, S5