ENX-US15WP
52
2.2.8
Set Supervisor Password
You can set supervisor password. It is able to enter/change the options of setup menus.
Follow these steps to change the password.
z
Choose the “Set Supervisor Password” option from the “Initial Setup Screen” menu
and press <Enter>. The screen displays the following message:
z
Please <Enter Password>
z
Press
<Enter>.
z
If the CMOS is good and this option has been used to change the default password,
the user is asked for the password stored in the CMOS. The screen displays the
following message:
Confirm Password
z
Type the current password and press <Enter>.
z
After pressing <Enter> (ROM password) or the current password (user-defined), you
can change the password stored in the CMOS. The password must be no longer than
eight (8) characters. Remember, to enable the password setting feature, you must first
select either “Setup” or “System” from the “Advanced BIOS Features” menu.
Summary of Contents for ENX-US15WP
Page 1: ...ENX US15WP Intel Atom Processor Nano ITX Motherboard User s Manual Ver 1 04...
Page 11: ...User s Manual ENX US15WP 11 Block Diagram...
Page 15: ...User s Manual ENX US15WP 15 1 3 Motherboard Layout...
Page 28: ...ENX US15WP 28 1 6 7 Digital I O Connector JDIO 1 6 8 LVDS Connector JLVDS...
