Avalue Technology EMX-ZXEDP, User Manual, Page: 64 / 80

EMX-ZXEDP
User’s Manual
64 EMX-ZXEDP
User’s Manual
Item Option Description
SATA Controller
Disabled
Enabled [Default] ,
Select whether to enable or disable SATA
controller.
Configure SATA as
AHCI [Default] ,
IDE
Select IDE/AHCI Mode. NOTE: Device
driver support is required for AHCI.
Depending on how the hard disk image
was installed, changing this setting may
prevent the system from booting.
Force SATA Speed setting
Gen1
Gen2
Gen3 [Default] ,
Gen1/ Gen2/ Gen3
Select SATA1 to MB or GF board
MB SATA [Default] ,
GF Board SATA
Select SATA1 to MB or GF board
3.6.3.2.3 HDAC Configuration
Item Option Description
OnChip HDAC Device
Disabled
Enabled [Default] ,
HDAC Control