EMX-945GSE-A1-DVIR
28 EMX-945GSE-A1-DVIR User
’s Manual
6. Primary IDE connector (40-1 pin IDE1)
These connectors are for Ultra DMA 133/100/66 signal cables. There are three interfaces
on each Ultra DMA 133/100/66 signal cable: blue, black, and gray.
Connect the blue interface into the motherboard’s IDE connector, then select one of the
following modes to configure your hard disk drive(s).
Cable Select Mode
- use this mode to select the operating mode by cable connectors.
No. of drives
Drive type
Drive jumper
Cable connector
1
With OS
Cable select
black
2
With OS
black
Without OS
gray
Jumper Select Mode
- use this mode to select the operating mode by hard disk drive
jumper.
No. of drives
Drive type
Drive jumper
Cable connector
1
With OS
Master
black or gray
2
With OS
Master
Without OS
Slave
