Avalue Technology ECM-SKLU, User Manual

Page: 53 / 85

User’s Manual
ECM-SKLU
User’s Manual
53
3.6.2.15 USB Configuration
The USB Configuration menu helps read USB information and configures USB settings.
Item Options Description
Legacy USB Support
Enabled [Default]
Disabled
Auto
Enables Legacy USB support. AUTO option
disables legacy support if no USB devices are
connected. DISABLE option will keep USB
devices available only for EFI applications.
XHCI Hand-off
Enabled [Default]
Disabled
This is a workaround for OSew without XHCI
hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
USB Mass Storage Driver Support
Enabled [Default]
Disabled
Enable/Disable USB Mass Storage Driver
Support.
Port 60/64 Emulation
Enabled
Disabled [Default]
Enable I/O port 60h/64h emulation support.
This should be enabled for the complete USB
keyboard legacy support for non-USB aware
OSes.
USB transfer time-out
1 sec
5 sec
10 sec
20 sec [Default]
The time-out value for Control, Bulk, and
Interrupt transfers.
Device reset time-out
10 sec
20 sec [Default]
30 sec
40 sec
USB mass storage device Start Unit command
time-out.
Device power-up delay
Auto [Default]
Manual
Maximum time the device will take before it
properly reports itself to the Host Controller.
‘Auto’ uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.