By using simultaneously the position 1 and the
position 5, a double counterweight shaft
configuration is also available.
This configuration it is recommended for heavier
setup.
NOTE: additional counterweight shaft is
optional
When the telescope balancing doesn’t require
many counterweights, and the M-zero obs works
ina single telescope setup, the StarGo box can be
comfortably placed on the bottom side of the DEC
arm by using the StarGo quick clamp that comes
provided with the mount.
NOTE:
Other mounts, based on geared wheel and worm drive systems, must be slightly
unbalanced in the direction of celestial movement to obtain precise tracking. Such mounts
may require occasional re-balancing by moving the counterweight. In contrast, the M-zero
obs mount is well balanced in every position to guarantee the absence of backlash, hysteresis
and pendulum effects around the meridian. This difference proves to be a significant
advantage. Due to the M-zero’s toothed belt transmission system, once balanced, it is no
longer necessary to change the weight position. This is a valuable feature for long term
Astrophotography around the meridian and is essential for the remote use of the mount.
5.
M-zero obs Alignment.
The mount alignment consists of adjusting the mount’s altitude and latitude such that its
©
All Rights reserved
31
