12 Reasons To Buy A Newport
Tested by Warnock Hersey to UL 1482/ULC S627/CSA B366.2/ASTM E 1509-95. This pellet fired appliance has been tested and listed for use in
maunfactured homes in accordance with Oregon Administrative Rules 814-23-900 through 814-23-909.
Mukilteo, WA
Visit us online: www.avalonstoves.com
Your Authorized Avalon Dealer
We reserve the right to improve our products at any time without prior notification.
Photos and illustrations are for descriptive purposes only. • Copyright © 2004 • Printed in USA 98800202
NOTE: Improper installation of your pellet appliance or failure to operate it according
to the guidelines detailed in the Owner's Manual may negate your warranty and
endanger your home and family.
*Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone of the area in which you live.
Pellet appliance performance can be affected by prevailing atmospheric conditions. Contact local building or fire officials about installation requirements in your area.
Height
Width
Depth
Flue
Diamete
3" Pellet Vent
Unit
Weight
190 lbs.
21 5/8"
20 7/8"
29 1/2"
Floor Protection
Minimum Hearth Pad Size:
21 5/8" Wide x 26 7/8" Deep
Newport Pellet Stove Performance
Corner Installation
Parallel Wall Installation
1.
No Spilled Fuel.
Entire stove top lifts up to allow easy
access and pellet loading.
2.
Huge Pellet Capacity
. Hopper holds 55 lbs. of pellets.
There's no waiting for fuel to run out before reloading.
3.
Heavy-Duty Auger.
Precision auger feeds pellet fuel
uniformly to the firepot, based on the automatic or
manual feed rate settings.
4.
Two-Stage Heat Exchanger.
Combination of 8 heat
exchange tubes and rear heat exchange plenum gains
maximum heat transfer from the stove to your home.
5.
Air Tube Scraper.
Hidden under the loading door,
this easy-to-use, pull rod removes ash from the air
exchange tubes.
6.
Super-Quiet Combustion Blower.
Variable speed
control allows you to turn the blower noise down in
conjunction with the feed rate.
7.
Auger Motor.
A heavy-duty gear motor with metal
gears, low r.p.m. and high torque, ensures long life and
reliability.
8.
Variable Speed Convection Blower.
This quiet blower
draws cool room air around the firebox, and two-stage
heat exchanger to deliver the desired heat to your home.
9.
Firepot & Standard Ignitor.
Stainless steel firepot and
reliable ignition system combine to make firestarting and
pellet burning as easy as the flip of a switch.
10.
Ash Dump.
Easy to access and operate, the ash
drop makes ash clean-up in the firebox a simple
mess free operation.
11.
Huge Ash Pan.
This is an ashpan! Designed for
maximum capacity and ease of removal.
12.
State-of-the-Art Circuit Board Operation.
Operate
your pellet stove manually or automatically with the
use of a wall thermostat for the ultimate in hands
free operation.
6” Minimum
3” Minimum
9” Minimum
3”
Minimum
Through the Wall Installations
Interior Vertical Vents
Floor Protection
6” Minimum
2”
Minimum
9” Minimum
“Tee”
6” Minimum
Through the Wall Vents
2” Minimum
2” Minimum
45
°
Elbow
45
°
3” Minimum
Interior Vertical Vents
2”
Minimum
6” Minimum
2”
Minimum
2”
Minimum
Floor Protection
“Tee”
™
Clearances to Combustibles
Hopper
Capacity
55 lbs.
Heating
Capacity*
800 to 1,600 Sq. Ft.
Max. Burn Time
Low -50 Hours
High -10 Hours
BTU Range
Low - 8,100
High - 28,000
Options:
24 Karat Gold Grill or Nickel
Plated Grille Door
One Piece Cast Log
Wall Thermostat
Remote Control Themostat
Efficiency
82%
