9
www.avalon-bay.com
A
SSEMBLY
&
I
NSTALLATION
1.
Remove the exterior and interior packaging. Check that 3
shelves are included. If any parts are missing, please contact the
dealer where you purchased the unit or Avalon Bay customer
service.
2.
Clean the interior surface with lukewarm water, using a soft
cloth.
3.
Place your wine cooler on a surface that is strong enough to
support the appliance when it is fully loaded. To level your
cooler, adjust the front legs at the bottom of the appliance.
4.
For proper ventilation, allow at least 2 inch clearance between
the back of the unit and any adjacent walls.
5.
For best results, install away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may
also cause the cooler not to perform properly.
6.
This cooler is not designed for placement in attic or basement.
The appliance is for indoor use only.