Installing Your Window Kit and Exhaust Hose
PREPARATIONS FOR INSTALLING THE WINDOW KIT
You must vent your portable air condi oner when running in it cooling mode. Your unit includes a window exhaust kit
that can be used to vent the unit out of a window.
Before you begin, make sure you have all the parts necessary for installa on and a loca on is picked.
When choosing a loca on keep in mind:
• The air condi oner should be placed on a
fi
rm founda on to minimize noise and vibra on. For safe and secure
posi oning, place the unit on a smooth, level
fl
oor strong enough to support the unit.
• The unit has casters to aid placement, but it should only be rolled on a smooth,
fl
at surface. Use cau on when roll-
ing on carpet and do not a empt to roll the unit over any objects.
• The unit must be placed within reach of a properly rated grounded socket.
• Never place any obstacles around the air inlet or outlet of the unit.
• Allow at least 20” of space from the wall for e
ffi
cient air-condi oning.
INSTALLATION IN A DOUBLE
ͳ
HUNG SASH WINDOW
1. Cut the foam seal to the proper length and a ach it to the window sill.
2. A ach the window slider kit to the window sill. Adjust the length of the window slider kit according to the width of
the window. Shorten the adjustable window kit if the width of the window is less than 26.5 inches. Open the win-
dow sash and place the window slider kit on the window sill.
3.Cut the foam seal to the proper length and a ach it on the top of the window slider kit. Close the window sash
securely against the window slider kit.
4. Finally, cut the foam seal to an appropriate length and seal the open gap between the top window sash and outer
window sash.
