8
Operation
INSTALLATION CHECK-LIST BEFORE OPERATION:
1.
Have all packing materials and tape been removed from the interior and exterior of the beverage
refrigerator?
2.
Have the installation instructions been followed, including connecting the machine to electricity?
3.
Has proper grounding been installed for the beverage refrigerator?
4.
Has the machine been leveled?
5.
Is the beverage refrigerator in a site where the ambient temperature is between 50° F and 90° F all year
round?
6.
Is there a clearance of at least 2
”
to 3” at the rear for proper air circulation?
USING YOUR CONTROL PANEL:
This beverage refrigerator has a temperature range from 34° F to 50° F.
Power Button
Press and hold down for three seconds to power your unit on. Once pressed the “Run” indicator light
will illuminate to indicate the unit is on and running. Press and hold for three seconds again and the unit
will power off and the “Run” In
dicator light will turn off.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 50° F is the highest
temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 34° F is the lowest setting
on this unit.
Interior Light
Press this button to cycle through the different internal light settings. There are four light settings:
Constant Blue, Constant White, Automatic Blue, and Automatic White. Press this button to choose the
next option in the progression, eventually cycling back to the original setting. The lights will fade out of
the previous setting and into the next setting in the cycle each time you press this button. Press and hold
this button for three seconds to turn the lights completely off or to turn them back on. Open and close
the door to check the internal light color and whether the lights stay on with the door closed (Constant
Mode) or illuminate only when the door is open (Auto
matic Mode). Please refer to the “Internal Light”
section on the next page for further detail.
