PAGE 11
Technical Support
(650) 384-0000
www.avalanwireless.com
AW5810HTA,HTS,HTP-PAIR
User’s Manual
This page displays the current RF frequency, the SSID, the Security Profile in use,
current transmission rates, amount of data sent and received since last reboot,
drops and errors. Also shown are graphs of megabits per second and packets per
second during the last three minutes or so. The graphs are well labeled and auto-
scale to fit the data. After viewing the status, you may leave the page by clicking
“Cancel” or by using the Main Menu. (If you click “OK” or “Apply”, the process will
restart and briefly interrupt the data flow.
If you are browsing to the AP in a point-to-multipoint system with several SUs, click-
ing on one of the WDS lines on the Interfaces Tab brings up a similar screen showing
only the traffic with that specific SU.
5. AP Client Status Page: From the Associations tab, clicking on one of the lines in
the table brings up a page showing the status of the remote end of the wireless link.
Several pieces of information related to the radio link quality are shown here.
• Tx/Rx Signal Strength in dBm as measured by the radio’s receiver
•
Signal to Noise ratio
•
CCQ (Client Connection Quality) shows the average percentage of theoretical
connection bandwith achieved with the current level of retries.
•
P Throughput is the currently achieved peak data rate.
