AW58100HTP-PAIR
User’s Manual
PAGE 4
Technical Support
(650) 384-0000
www.avalanwireless.com
click
Step 5. Log In to the Access Point: The default login name is “admin” and the
password is “password.” If your login is successful, you should see a status window
similar to this:
CAUTION: Do not click the small “D” button
- it deletes the wireless bridge inter-
face and you will need to call tech support to restore it. Click the “Associations”
tab near the top of the window to bring up this screen:
If the two radios are communicating, you will see a line as shown with the MAC
address of the Subscriber Unit. The Signal Strength box will indicate whether the
receivers are being overloaded. Re-position antennas if necessary to bring the sig-
nal strength below -30 dBm.
Utilizing state of the art MIMO technology, the AW58100HTP-PAIR achieves very high
data rate through a combination of dual spacial streams and higher level OFDM modu-
lation. The default RF configuration provides a 20 MHz channel bandwidth with 5
selectable non-overlapping channels to choose from. When configured and mounted
with antennas aimed at each other, the two radios operate as a wireless virtual LAN
cable over longer distances than can be achieved with similar products by virtue of
the greater RF power allowed for with point-to-point connections.
