5.1
Installation of group 0+, I
three-point seatbelt
Make sure the recline position of the car seat is in position 5.
(Suitable for children from 0 to 4 years or 0 to 18 kg).
1. Refer to section 4.5 to adjust the seat body (Picture 11) to position 5.
Confirm that it is in a locked state (cannot slide and rotate).
Install the ISOFIX according to section 4.1 (11-D).
Caution: The ISOFIX connector is correctly installed only if the ISOFIX indicator
turns completely green. (11-D)
3. Use the headrest cushion, adapter seat and
sleeping pad
when the weight
is less than 5 kg.
Use the headrest cushion and adapter seat when the weight is between 5 and
use the head restraint cushion and adapter seat when the weight is between 5
and 10 kg.
Remove the head restraint cushion, seat adapter and sleeping pad when the
weight is more than 10 kg.
4. Pull out the 3-point seat belt, pass it behind the booster seat and through the
back of the seat through the guide slots (picture 11).
Then route the shoulder belt through the upper seat belt guide slot (11-B), and
then through the upper seat belt guide slot (11-B), and then through the upper
seat belt guide slot (11-B), and then insert it into the seat belt buckle (11-C).
5. Tighten the 3-point seat belt to make sure that it is properly the weight is more
than 10 kg.
5. Tighten the 3-point seat belt to make sure that it is snug and does not twisted.
6. Open the 5-point buckle and then position the infant, adjust the belt to the
correct position (11-A). See section 4.2.
5.
Rear facing Installation
11
11-D
11-A
11-C
11-D
11-D
11-B
31
