2
Glue required
Baseplate without
mounting-ears
Apply glue to these
areas or the underside of
the plastic baseplate
Apply glue to these areas
before tightening the
two screws.
Baseplate with
mounting-ears
Step 2. Glue the baseplate
a) Apply glue to the shaded area, as indicated, for both the mounting-ear and non-
mounting-ear baseplate.
Notes:
1. Glue prevents screw loosening caused by thermal stress in the plastic material, especially at high
temperatures. Gluing is required.
2. A high temperature adhesive such as Hernon Ultrapoxy
TM
317 (www.hernonasia.com) is
recommended.
Hub
Latch
Step 3. Assemble the module
Slide the module hub onto the motor shaft while matching the guide poles on the
plastic baseplate to the alignment hole on the encoder unit. Then, snap-fit the three
latches to the base plate.
