6
Regulatory Requirements
•
Passes FCC B and worldwide analogous emission
limits when assembled into a mouse with unshielded
cable and following Avago recommendations.
•
Passes EN61000-4-4/IEC801-4 EFT tests when as-
sembled into a mouse with unshielded cable and fol-
lowing Avago recommendations.
•
UL flammability level UL94 V-0.
•
Provides sufficient ESD creepage/clearance distance
to avoid discharge up to 15kV when assembled into a
mouse according to usage instructions above.
•
For eye safety consideration, please refer to the docu-
ment, Eye Safety Calculation AN1228 available on the
web site, http://www.avagotech.com/opticalnaviga-
tion
Below is the summary of the components contained in
the ADNK-3034-ND24 Designer’s Kit.
Sensor
The sensor technical information is contained in the
ADNS-3040 Data Sheet.
Other system components
Technical information on the TI MSP430F1222 microcon-
troller is contained in the TI Data Sheet. Please contact
your local TI office for theMSP430 development tools.
These tools will allow the designer to make changes and
recompile the source code; perform In-Circuit Emulation
and debug new code for added features.
Programming support and programmer adaptors for the
MSP430 can be found through TI or through other 3rd
party programming tool companies. For further informa-
tion on this product, please contact Texas Instrument.
Cypress Semiconductor provides extensive develop-
ment tools for the CY7C63231 USB controller used in the
receiver dongle.
Lens
The lens technical information is contained in the ADNS-
3120-001 Data Sheet.
LED Assembly Clip
The information on the assembly clip is contained in the
ADNS-2200 Data Sheet.
LED
The LED technical information is contained in the HLMP-
ED80-PS000 Data Sheet and Application Note AN-1228.
Additional application notes regarding Eye Safety Re-
quirements are also available at Avago’s website.
Base Plate Feature – IGES File
The IGES file on the CD-ROM provides recommended
base plate molding features to ensure optical alignment.
This includes PCB assembly diagrams like solder fixture in
assembly and exploded view, as well as solder plate. See
Appendix D for details.
Reference Design Documentation – Gerber File
The Gerber File presents detailed schematics used in
ADNK-3034-ND24 in PCB layout form. See Appendix C
for more details.
Overall circuit
A schematic of the overall circuit is shown in Appendix A
of this document. Appendix B lists the bill of materials.