
DESCRIPTION OF LED INDICATORS AND BUTTONS
CHARGING
ź
First, make sure the voltage of lead acid batteries you want to charge is 6V/12V.
ź
Disconnect the battery from its operational load. If the battery is installed in the vehicle, turn the ignition
off as well as other devices connected to the battery. Follow the safety instructions of the vehicle
manufacturer. Modern vehicles are equipped by sensitive electronic components and controls that can
be damaged if you don’t strictly follow the instructions of the vehicle manufacturer.
ź
Plug the charger into the electrical outlet (100V - 240V ~50Hz/60Hz).
ź
Connect the red clip to the positive (+) terminal of the battery. Connect the black clip to the negative (-)
terminal of the battery.
ź
If the positive and negative terminals are reversed the LED indicator
will light up.
ź
If the battery is damaged or electrical circuit shorted the LED indicator
will light up.
ź
The charger has a memory function. After connecting to the outlet it’s in the mode that was set the last
time.
ź
Now you can now select the operating mode by pressing the button
, see below.
ź
After charging, unplug the charger from the electrical outlet.
ź
First remove the clip from the negative terminal and then the clip from the positive terminal.
OPERATING MODES
WINTER MODE (MAXIMUM CHARGING VOLTAGE 14.7V ± 0.25V, 4.5A).
ź
This mode is suitable for all 12V lead-acid batteries with a capacity of 25Ah at low ambient
temperatures.
ź
To select this mode, press the button
until the LED indicator
lights up. After the indicator lit
up the charger will automatically start charging.
ź
When the battery is fully charged, the LED indicator
will light up and charger will automatically
switch to maintaining charge mode.
ź
This mode can also be used for AGM batteries, if the manufacturer recommends higher charging
voltages. Always follow the manufacturer's instructions.
SUMMER MODE (MAXIMUM CHARGING VOLTAGE 14.4V ± 0.25V, 4.5A).
ź
This mode is suitable for all 12V lead-acid batteries with a capacity of 25Ah at normal ambient
temperatures.
ź
To select this mode, press the button
until the LED indicator
lights up. After the indicator lit
up the charger will automatically start charging.
ź
When the battery is fully charged, the LED indicator
will light up and charger will automatically
switch to maintaining charge mode.
6V CHARGING MODE (MAXIMUM CHARGING VOLTAGE 7.2V ± 0.25V, 1A).
ź
This mode is especially designed for smaller 6V batteries with a capacity of less than 24Ah, for
example 6V motorcycle batteries.
ź
To select this mode, press the button
until the LED indicator
lights up. After the indicator lit
up the charger will automatically start charging.
ź
When the battery is fully charged, the LED indicator
will light up and charger will automatically
switch to maintaining charge mode.
12V CHARGING MODE (MAXIMUM CHARGING VOLTAGE 14.4V ± 0.25V, 1A).
ź
This mode is especially designed for smaller 12V batteries with a capacity of less than 24Ah, for
example 12V motorcycle batteries.
6V
6V
12V
3
2
1
Winter mode. The maximum voltage of 14.7V - 4.5A. Mode for batteries with voltage of 12V
25Ah - 120Ah. Suitable for charging at low temperatures. Recommended for AGM batteries.
2
Summer mode. The maximum voltage of 14.4V - 4.5A. Mode for batteries with voltage of
12V 25Ah - 120Ah. Suitable for charging at normal temperatures.
3
Mode for batteries with voltage of 6V. The maximum voltage of 7.2V - 1A. Suitable for
charging smaller batteries 6V < 24Ah.
4
Mode for batteries with voltage of 12V. The maximum voltage of 14.4V - 1A. Suitable for
charging smaller 12V batteries < 24Ah.
5
LED power indicator. LED indicator lit up - charger is plugged in.
6
LED indicator lit up - terminals are reversed.
7
LED indicator of damaged batteries. LED indicator lit up - battery is damaged/circuit is
shorted.
8
LED charge level indicator. LED indicator lit up - battery capacity is below 50%.
9
LED charge level indicator. LED indicator lit up - battery capacity is below 70%.
10
LED charge level indicator. LED indicator flashes - battery capacity is above 75%, battery
is charging. LED indicator lit up continuously - battery is fully charged.
11
Button for setting charging modes.
6V
12V
POWER
POWER
12V
6V
1A
4.5A
BATTERY CHARGER
6V/12V - 4.5A
MODE
1 2 3 4 5
11
6 7 8 9 10