VRSE
®
|
LLT
Maintenance Guide
AVA by Novalis | P: 877.861.5292 | E: [email protected] | www.avaflor.com | revised on 01.6.22 |
Page 2
contact point that is at least 1 -sq. in. or 1.125-in. in diameter
to limit indentation and flooring or finish damage. All rolling
seating in desk areas must have chairs that use soft, W-Type
polyurethane wheels or a resilient flooring chair pad installed
over the finished floor to protect it.
Do not use nylon/hard
plastic wheels, glides or casters
.
All fixed furniture legs or corners must have permanent floor
protectors installed on all contact points to reduce indentation,
wear, scratching and other flooring or finish damage. Floor
protectors must be intended for resilient flooring and made of
a soft material (such as a felt, silicone or a poly-based material).
Floor protectors must have a flat contact point of at least 1 -sq.
in. or 1.125-in. diameter and must cover the entire bottom
surface of the furniture leg.
Do not use nylon/hard plastic
floor protectors or furniture feet.
Ensure all furniture castors and chair legs are clean and free of
all dirt and debris. Routinely clean chair castors and furniture
legs to ensure that dirt or debris has not built up or become
embedded in castors or floor protectors. Replace chair castors
and floor protectors at regular intervals, especially if they
become damaged or heavily soiled. Felt floor protection devices
may need to be replaced 3 or more times a year to prevent
accumulation. Use an effective walk-off mat or system at all
outdoor entrances/exits and prevent water from accumulating.
Ensure mats are manufactured with non-staining backs to
prevent discoloration.
For more information regarding cleaner application, please consult all associated product data
sheet, SDS and warranty information.
