18
Slow Juicer
SJ-009
DISASSEMBLING METHOD
NOTE:
If the juicer gets overheated, it will turn off automatically to protect
the machine. In this case, please turn the juicer off
“O”
. Wait 10
minutes to let the juicer cool down and then turn it on again.
To disassemble the unit after using and before cleaning. Please turn the
juicer to “O” position and disconnect the juicer from power source.
Then, please follow the steps below :
1.
Remove the Juice and Pulp containers. (Fig 6)
2.
Remove the Chute. Turn the chute anti-clockwise until the ▲ aligns
with the “ ” sign. (Fig7)
3.
Remove the Squeezing Auger by pulling it out upward. If it is
very hard, swing gently and pull. (Fig 8)
4.
Remove the Squeezing Bowl by lifting it upward vertically. (Fig 9)
Fig 8
Fig 9
Fig 6
Fig 7
CLEANING & MAINTENANCE
IMPORTANT :
Please wash the juicing parts every time immediately after each used,
otherwise the pulp might stick tightly in Juicing Bowl & Squeezing
Auger which will then affect the disassembly, cleaning and juicing
performance.
1.
Switch off and unplug the juicer.
2.
Wash the disassembled parts (Fig 10) with water. If the meshes
are clogged with pulp, please use the provided cleaning brush to
remove the dregs.
