6
4.3
Connecting Power to the Unit
The VS-223 Scan Converter is shipped with a Power Adapter to convert
100~240VAC@50-60Hz to 5VDC. Connect the DC Output Cord from the Power
Adapter to the back of the unit and then plug the Power Adapter into an AC
Receptacle. When the unit’s Power Switch is pressed, the Power LED indicator
will illuminate if power is present.
5.0
OPERATING THE UNIT
After connecting the input of the VS-223 to an HDTV source and the output to an
appropriate display, apply po wer and the unit will automatically detect the
resolution being output by the HDTV source. Select the proper television
standard (NTSC/PAL) and an image will appear on the display. If you wish to
make the display’s image smaller or larger, you can move the Underscan-
Overscan switch as required. Connecting three coaxial cables to the bypass
connectors allow you to display YPbPr images on a monitor capable of
reproducing HDTV analog signals.
Note: The VS-223 performs a turn on sequence each time that power is applied.
During this initialization, a full screen image is required on the input as opposed
to letterbox. Once initialization has occurred, the unit will track HDTV input
resolutions and position all imagery automatically without manual intervention.
6.0 TROUBLESHOOTING
Other than checking for faulty cables and for a lighted power LED, the only
common problem would be choosing a wrong television standard setting or
powering the unit up with a letterbox image as an input. If power is present and
there are no faulty cables, make certain you have the NTSC/PAL switch set
correctly and a full screen image present then power the unit off, wait a few
seconds and power the unit back on.
After trying the above suggestions sh ould the problem still persist, contact your
dealer for additional suggestions before contacting TV One. Should the dealer’s
technical personnel be unable to assist you, contact TV One via our support
website:
http://tvone.crmdesk.com.
Create a technical support request on the
site and our support team will respond within a short period of time.
7.0 LIMITED WARRANTY
TV One warrants the original purchaser that the equipment it manufactures or
sells will be free from defects in materials and workmanship for a fixed term from
the date of purchase. The warranty term for specific product lines is defined
below.
Summary of Contents for VS-223
Page 1: ...VS 223 YPbPr to CV SV Scan Converter Instruction Manual...
Page 2: ......
