AV TOOL CSC-1600HD, Operation Manual

Page: 9 / 16

9
5.3
Vertical Freq Adjust
Many of the Output Resolutions have multiple Vertical Refresh Rate possibilities. First
choose the desired Output Resolution by pressing the desired button in the OUTPUT
SELECT section on the front panel. Then, press MENU, choose the Vertical Freq Adjust
section and press ENTER. This Menu will display the available selections associated with
the Output Resolution selected. This may be as many as four choices, however, some
Output Resolutions have only one choice. Choose the desired rate and press ENTER.
After selection, pressing MENU twice removes the OSD from the screen.
5.4 OSD Display
Under normal conditions, the OSD will briefly display the results of changes to the Input or
Output selection. However, this feature can be turned off when it is not desirable to display
this information. For example, when the unit is being used to switch Video Inputs to a
Projector or other display during a live event and it is undesirable to have the change
displayed for all to see. To disable the OSD during these selections, press MENU,
choose the OSD Display section and press ENTER. Then you may choose OSD Display
OFF or later turn it back on. In the OFF position, the OSD only appears when the MENU
is selected and not when an Input or Output selection is made.
5.5 Output Terminal
The RGBHV or YPbPr Output Signal is available on the rear panel either on 5 BNC
connectors or an HD-15 connector, but not both simultaneously. It is necessary to choose
via the Menu which is selected. Press MENU, choose the Output Terminal section and
press ENTER. Then choose either HD-15 Output Terminal or BNC Output Terminal and
Press ENTER. Shortcuts: (1) to select the HD-15 Output Terminal, hold MENU for 3
seconds, and (2) to select the 5 BNC Output Terminal is to hold ENTER for 3 seconds.
5.6
IR Sensor
Under certain circumstances it may be desirable to disable the Infrared Sensor of the unit.
For example, if the unit is operating in the proximity of other IR-controlled devices that
may share the same commands or frequency. To disable the IR Sensor, press MENU,
choose the IR Sensor section and press ENTER. Then you may choose IR Sensor OFF
or, later turn it back on by choosing IR Sensor ON. In the OFF position, the unit will not
respond to commands from the IR Remote Control unit.
5.7 Front Panel Lockout
Under certain circumstances it may be desirable to disable the Front Panel Controls. To
do so, press MENU, choose the Front Panel Lockout section and press ENTER. Then
you may choose Front Panel Controls OFF. In the OFF position, the unit will not respond
to commands from the Front Panel. To return to normal operation, press and hold
simultaneously the + and – buttons for 3 seconds or use the IR Remote Control to gain
access to the Menu or the use the RS-232 commands.