2
1.0
INTRODUCTION
Thanks for purchasing this product from the AV Toolbox Division of TV One. The
AVT-4000 Series Audio/Video Distribution Amplifiers allow a user to multiply the
video output of a Composite Video or S-Video device and its Stereo Audio signal
either four or eight times, allowing the viewing of one signal at up to eight
different locations and/or providing a method to send one audio and video output
to up to eight different devices such as VCRs. This is but one of our complete
range of video and audio products.
1.1
Liability Statement
Every effort has been made to ensure that this product is free of errors. TV One
cannot be held liable for the use of this hardware or any direct or indirect
consequential damages arising from its use. It is the responsibility of the user of
the hardware to check that it is suitable for his/her requirements and that it is
installed correctly. All rights reserved. No parts of this manual may be
reproduced or transmitted by any form or means electronic or mechanical,
including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.
TV One reserves the right to revise any of its hardware and software following its
policy to modify and/or improve its products where necessary or desirable. This
statement does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The TV One logo, AV
Toolbox logo, TV One-task and CORIO are the registered Trademarks of TV
One. All other trademarks are the property of their respective holders.
1.2
Features
Distributes Composite Video or S-Video signals to 4 or 8 devices
Distribute Stereo Audio signals to 4 or 8 devices
10 MHz bandwidth for superior video response
Video isolation and S/N ratios of more than 50db
Audio distortion of less than 0.6db
Uses standard RCA and S-Video connectors for inputs and outputs
Simple installation and operation
