background image

7

WARRANTY

The warranty period for production deficiencies is 5 years for the frame elements and 24 months

for the projection surface. 

DECOFRAME is developed for indoor use only. 

Any damage and consequential damage caused by outdoor use is not covered by warranty.

The general terms and conditions are available at 

http://avstumpfl.com/agb

LIMITATION OF LIABILITY

All the details in this manual were compiled in consideration of the standards and legal regulations

applicable at this time, as well as the experience of the manufacturer and qualified staff. The 

manufacturer accepts no liability for damage to persons or things (projection screen, other devices, 

goods, etc.) resulting from:

Non-observance of the manual and the regulations/safety instructions contained therein.

•  Failure to comply with the local safety regulations.

•  Inappropriate use (misuse).

•  Use of unauthorized and non-trained staff.

•  Unauthorized equipment conversions and technical modifications by the operator himself.

•  Use of spare parts not approved by the manufacturer.

•  Typesetting and print errors.

Failure to observe the above points will invalidate the warranty claims.

Technical specifications are subject to change without notice.

The local regulations and safety regulations and the essential safety requirements apply for the use of 

this projection screen.

DISPOSAL

At the end of its lifetime this product must not be disposed of with normal household waste but needs 

to be taken to a collection site for recycling.

Separate disposal of the product makes an important contribution towards environmental protection.

Frame components are made of aluminum and steel. The projection material is PVC vinyl.

Contact your local disposal company for the address of a collection center.

Subject to modifications, errors expected !

Summary of Contents for DECOFRAME











Reviews: