103.108UK User Manual
To use NFC function, first of all the NFC data exchange function needs to be swtiched on,
please refer to your device manual on how to enable NFC data exchange function. Once its
on, simply tap the back of the device to the NFC tag. A message should pop up to confirm if
you want to pair up with “STA40-BT”. Press YES or OK to confirm pairing. Please note,
detection of the NFC tag is within 3cm distance, covers or cases may prevent your device from
detecting the NFC tag. If this is the case, remove your case or cover and try again.
To check if your device is NFC enabled please check with the compatiblity list on the link
below:
http://en.wikipedia.org/wiki/List_of_NFC-enabled_mobile_devices
Specifications
Power Supply
100-240Vac, 50/60Hz
Power adaptor
24Vdc, 2910mA
Max. output
75W per channel
Output power
35Wrms @ 8Ω, 5% THD per channel
Output impedence
8Ω to 16Ω
Bluetooth™ range
10m
Bluetooth™ version
2.1
Dimensions
150 x 135 x 48mm
Weight
600g
Troubleshooting
No power / power LED not lit
Check power switch on the back of the
amplifier is switched on.
Check DC plug is fully inserted at the back.
Check the mains is switched on and mains
lead is in good condition and fully inserted to
the DC adaptor.
Power on but no music output
Check input connection is connected properly.
Check the correct input is selected.
Check audio device is playing.
Check volume of audio device and amplifier
are up.
Check speaker cable is striped and connected
properly to the amplifier and speaker.
