manualshive.com logo in svg

AV-GAD EasyLoader AV-701, End User Operating Manual, Page: 15 / 23

Share
Download
AV-GAD EasyLoader AV-701 End User Operating Manual Download Page 15

 

15 

The sounder emits sounds in the following instances: 
 

OPERATION 

SOUNDER RESPONSE 

 

"

Pressing of any key  

Short confirmation beep 

"

Hold-down functions 

Long confirmation beep  

"

Faulty programming input 

Long beep (+ ‘E’ display)  

"

Delayed Zone triggering 

3 long beeps 

"

Exit delay starting (if programmed) 

Warning beeps until the delay is over 

"

Completion of Arm/Disarm programming 

 code 

One long confirmation beep 

"

Programming Telephone numbers 

Two confirmation beeps 

"

Completion of address programming  

Two confirmation beeps 

"

Pressing ‘Code 7’ for driving door opening 

Seven confirmation beeps 

"

 System Arming with Instant or 24H  

   troubled zone 

Five warning beeps + troubled zone 

"

 Feature programming  

Two confirmation beeps 

"

 Follow-Me number programming  

Two confirmation beeps 

"

During alarm (requires programming)  

Intermittent beep until alarm reset 

 

AV-707, AV-706, AV-705 Keypads 

(LCD type for PRO panels)  

Introduction 

The AV-707 

EasyKey

™ is the future-generation keypad

,

 with the New Look shape, 

fully-customized microprocessor based remote station, multitasking functions with 32 
Keypad ID’s, comply with year 2000 requirements. AV-706 provides similar 
functions. For more details, refer to the AV-707/706 manual. The AV-705 is an 
economical keypad, its shape similar to the AV-707 and supplied without the LCD 
display. 
The AV-707, 706 and 705 fits only PRO type control panels. 
After power failure, ‘Set Panel Time’ is displayed. To set time hold-down ‘0’ key 
then Hold-down ‘1’, enter time in 24H format and press #. To set the date, hold-down 
‘0’ key then hold-down ‘2’, enter date in dd-mm-yy format and #. 

Summary of Contents for EasyLoader AV-701
























Reviews:

No comments