ConteraIP Outdoor Dome Flush Mount Adapter (CLD-FMA) Installation Instructions
2
Step 3
Place the camera housing into the flush mount adapter. Insert and tighten the 4 screws provided
with the flush mount adapter.
NOTE: Do not remove or damage the rubber layer on the camera housing. It is designed
to be pierced by the screw to maintain the IP66 rating and prevent water ingress.
Step 4
Using flush mount adapter template, cut a 6.75" [171.5 mm] diameter hole in ceiling at desired
camera location.
Ø6.75"
(171.5mm)
S
S
