background image

Warranty 

Warranty 

Products are backed by a limited 3-year parts and labor warranty. For 
the following cases AV Access Technology Limited shall charge for the 
service(s) claimed for the products if the product is  still remediable 
and the warranty card becomes unenforceable or inapplicable. 
1.

 

The original serial number (specified by AV  Access Technology 
Limited) labeled on the product  has been removed, erased, 
replaced, defaced or is illegible. 

2.

 

The warranty has expired. 

3.

 

The defects are caused by the fact that the product is repaired, 
dismantled or altered by anyone that is not from an  AV Access 
Technology Limited  authorized service partner.  The defects are 
caused by the fact that the product is used or handled 
improperly, roughly or not as instructed in the applicable User 
Guide. 

4.

 

The defects are caused by any force majeure including but not 
limited to accidents, fire, earthquake, lightning, tsunami and war. 

5.

 

The  service, configuration and gifts promised by salesman only 
but not covered by normal contract. 

6.

 

AV Access Technology Limited  preserves the right for 
interpretation of these cases above and to make changes to 
them at any time without notice. 

 

Thank you for choosing products from AV Access. 

 

www.avaccess.com

 

20 

 

 

Summary of Contents for 4KSP18-L

























Reviews: