[email protected]
(4)
CEC
Output Port:
Select one Output (1-4) port or all from the drop-down menu
to control.
Note:
When Output port is set to “all”, the Auto CEC and Delay Time (min)
settings are disabled.
Manual (ON/OFF):
Click “ON/OFF” button to power on/off the CEC-enabled
display immediately.
Auto CEC:
Click “ON/OFF” button to set Auto CEC control enable/disable.
The default setting is “ON”.
Delay Time (min):
Click the up/down arrow to set the time for the display to
power off automatically when no signal is present. Then click “Apply” to take
effect. For example, if Auto control is set as on and the time is set to 2
minutes, click “Apply”, the output display will power off automatically when
there’s no signal at the display for 2 minutes.
(5)
Audio Mute
ON/OFF:
This section allows you to set Audio output (1-4) mute to ON/OFF.
The default setting is OFF.
Note:
The SPDIF Out 1-4 is following the audio output of HDMI OUT.
