QUICK START
It is recommended to fully charge the device before first use
.
Twist and lift the glass mouthpiece from the Cenote base to expose the heating rod.
Place ceramic nail into the center of the heating rod. To ensure contact with the heat sensor, press nail
firmly to the bottom.
Remove the glass nozzle from the mouthpiece and fill water from the pipe. Avoid filling water while
the mouthpiece is still attached to the base
Secure the glass nozzle and twist the water-filled mouthpiece back on the base. The pipe will face
the button when seated correctly
Lift the carb cap from the mouthpiece and load concentrates into the ceramic nail with the loading
tool. Secure the carb cap back in place. For best performance, 10-20mg of material is recommended
(about the size of a lentil).
1.
2.
3.
4.
5.
6.
Fill the mouthpiece
with water from the pipe
Water line
p
Tip:
Do not overfill the ceramic nail.
