1.
2.
3.
4.
5.
6.
Due to safety concerns, it is not recommended to use Calent while
charging.
To charge the device, connect one end of the USB-C charging cable to
your device and the other end to a charging adapter.
Charging via a standard 5V 2A power adapter takes approximately
2.5 hours for a full charge. Every full charge generates approximately
20-session usage.
To check the current battery level, press the power button 3 times and
the LED ring light will indicate its status. Each bar indicates ~25%
battery level.
If your battery level is low when you start your session, the device will
blink in red 3 times as a notification.
When the battery runs out of power, the LED ring light will blink
10 times in red, and short vibrations will occur. The device will then
turn off automatically.
Charging & Battery Level
The AUXO Connect App
AUXO Connect
1.
2.
3.
4.
5.
1.
2.
3.
4.
Turn on the device.
Turn on Bluetooth on your phone and place the device near your phone.
When only one device is found, select accordingly. The LED ring light
will blink 3 times when paired successfully. If multiple devices are found,
the selected device will blink slowly to indicate selection; if paired
successfully, the LED ring light will blink 3 times.
If the connection is unsuccessful, restart the app and connect again.
If on Android, your location services are enabled (mandated by Android).
Connecting Your Device to the App
Your AUXO app is up to date.
Your device is turned on (restart if necessary).
The Bluetooth on your phone is turned on.
The device is near your phone (as close as possible).
If you're having trouble pairing your Calent with your phone, please
ensure the following:
