19
6.3
Changing the Elastic Energy Storages (EES)
For certain circumstances you might need to remove or replace the elastic energy storage elements:
-
For cleaning and washing.
-
To replace them in case of wear and tear.
-
To switch them with different (stiffer or softer) EES to adjust the support to your personal needs.
If you want to attach, remove or replace them, simply follow these steps.
Detaching the EES
1 - Push the connecting loop to the side and
pull it away from the EES hook
2 - When the loop slips out at the opening,
pull the EES hook out of the loop
3 - Repeat on the other end of the EES
Attaching the EES
1 - Take one EES with the AUXIVO Logo
facing you in your hand
2 - Grab the lower connecting strap from the
right thigh cuff. Make sure it runs through
the right side of the Hip Belt tunnel.
3 - Insert the longer side of the EES hook
into the loop first. Then squeeze the loop to
let the shorter side of the hook also slip in
the loop.
4 - Grab the connecting loop coming from
the left shoulder and insert the hook at the
upper end of the EES and repeat the same
procedure as already done on the now
inserted EES hook.
5 - Check again that the logos on the EES
hooks and also the elastic webbing with the
white dots are facing you.
6 - Repeat steps 1 to 5 and double check
that the crossing section of the connecting
strap from the cuffs is above the hip belt.
Make sure there is no twist in the
connecting straps.
Summary of Contents for LiftSuit
Page 1: ...Auxivo LiftSuit Handbook and User Guideline ...
Page 24: ...21 ...
